Recent Scheme of Work on Auto Mechanics

Syllabus for Senior Secondary

FIRST TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Vehicle Layout

Topic: Safety

Sub-Topic:
Content:
1. Meaning and causes of workshop accident.
2. Accident prevention technique.
3. Safety device :
i. fire extinguishers,
ii. Sand buckets
iii. Blanket and
iv. Gloves
WEEK 2

Theme: Vehicle Layout

Topic: Principle of operation main components mounted on the chassis

Sub-Topic:
Content:
1. Engine
2. Transmission
3. Steering system
WEEK 2

Theme: Vehicle Layout

Topic: Routine maintenance of the chassis

Sub-Topic:
Content:
1. Checking chassis for alignment and faults.
2. Maintain and adjust couplings.
3. Methods of chassis joints.
• Permanent joints
• Temporary joints
WEEK 3

Theme: Vehicle Layout

Topic: Safety (Cont.)

Sub-Topic:
Content:
1. Meaning and causes of workshop accident.
2. Accident prevention technique.
3. Safety device :
i. fire extinguishers,
ii. Sand buckets
iii. Blanket and
iv. Gloves
WEEK 3

Theme: Vehicle Layout

Topic: Principle of operation main components mounted on the chassis (Cont.)

Sub-Topic:
Content:
1. Engine
2. Transmission
3. Steering system
WEEK 3

Theme: Vehicle Layout

Topic: Routine maintenance of the chassis (Cont.)

Sub-Topic:
Content:
1. Methods of supporting various components to the chassis.
• Engine mountings, suspension units, rubber pads, etc.
2. Alternative arrangements of power and transmission system.
WEEK 4

Theme: Vehicle Layout

Topic: Hand Tools/Maintenance

Sub-Topic:
Content:
1. Hand tools: types, sketches, and uses (e.g. marking and measuring, cutting and boring, bench and holding tools, etc.)
2. Hand tools maintenance
WEEK 4

Theme: Automobile Engine

Topic: Engine operation

Sub-Topic:
Content:
Two stroke cycle (Spark Ignition Engine (S.LE) and Compression Ignition Engine (CLE.)).
WEEK 4

Theme: Automobile Engines

Topic: Engine Classification

Sub-Topic:
Content:
1. Gas turbine engine.
2. Winkle rotary engine
3. Types of engine cylinder
4 Combustion chambers.
WEEK 5

Theme: Vehicle Layout

Topic: Hand Tools/Maintenance (Cont.)

Sub-Topic:
Content:
1. Hand tools: types, sketches, and uses (e.g. marking and measuring, cutting and boring, bench and holding tools, etc.)
2. Hand tools maintenance
WEEK 5

Theme: Automobile Engine

Topic: Engine operation

Sub-Topic:
Content:
Four stroke cycle (Spark Ignition Engine (S.LE.) and Compression Ignition Engine (CLE))
WEEK 5

Theme: Transmission System

Topic: Fluid flywheel and transmission components

Sub-Topic:
Content:
1. Fluid flywheel.
2. Gear box
3. Propeller shaft
4. Universal joints
5. Rear axle
WEEK 6

Theme: Vehicle Layout

Topic: Equipment and Maintenance

Sub-Topic:
Content:
1. Equipment: types, sketches, and uses (e.g. bending, spanners, sockets vices)
2. Equipment maintenance.
WEEK 6

Theme: Automobile Engine

Topic: Engine operation

Sub-Topic:
Content:
Detonation: causes and effects.
WEEK 6

Theme: Transmission System

Topic: Fluid flywheel and transmission components (Cont.)

Sub-Topic:
Content:
1. Fluid flywheel.
2. Gear box
3. Propeller shaft
4. Universal joints
5. Rear axle
WEEK 7

Theme: Vehicle Layout

Topic: Equipment and Maintenance (Cont.)

Sub-Topic:
Content:
1. Equipment: types, sketches, and uses (e.g. bending, spanners, sockets vices)
2. Equipment maintenance.
WEEK 7

Theme: Automobile Engine

Topic: Engine operation

Sub-Topic:
Content:
Types of engine cylinder:
i. Single cylinder engine
ii. Multi cylinder engine
WEEK 7

Theme: Suspension And Steering System

Topic: Types of suspension springs

Sub-Topic:
Content:
1. Carry out alignment setting on vehicle.
2. Principle of operation and construction of a steering system. Principle of operation of Ackerman linkage Camber angle Castor angle Toe-in and Toe-out King pin inclination Understeer and Oversteer Slip angle and their adjustments
WEEK 8

Theme: Vehicle Layout

Topic: The Chassis

Sub-Topic:
Content:
1. Principal components of motor vehicle :
Identification of:
i. Engine
ii. Transmission system
iii. Chassis
iv. Steering system
v. Braking system
vii. Suspension system
2. Functions of each principal components
WEEK 8

Theme: Automobile Engine

Topic: Engine operation

Sub-Topic:
Content:
Forms of engine arrangements:
i. In-line engine
ii. Vee engine
iii. Horizontally opposed.
WEEK 8

Theme: Suspension And Steering System

Topic: Types of suspension springs (Cont.)

Sub-Topic:
Content:
1. Carry out alignment setting on vehicle.
2. Principle of operation and construction of a steering system. Principle of operation of Ackerman linkage Camber angle Castor angle Toe-in and Toe-out King pin inclination Understeer and Oversteer Slip angle and their adjustments
WEEK 9

Theme: Vehicle Layout

Topic: The Chassis (Cont.)

Sub-Topic:
Content:
1. Principal components of motor vehicle :
Identification of:
i. Engine
ii. Transmission system
iii. Chassis
iv. Steering system
v. Braking system
vii. Suspension system
2. Functions of each principal components
WEEK 9

Theme: Automobile Engine

Topic: Engine operation (Cont.)

Sub-Topic:
Content:
Forms of engine arrangements:
i. In-line engine
ii. Vee engine
iii. Horizontally opposed.
WEEK 9

Theme: Engine Lubrication And Cooling System

Topic: Additives and types of cooling system

Sub-Topic:
Content:
1. Forms and types of lubrication systems
2. Use of lubrication
3. Parts needing lubrication
4. Lubrication diagnosis and services to be carried out.

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners

SECOND TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Engine

Topic: Types of Engine

Sub-Topic:
Content:
1. Identification of main components of an engine.
2. Line diagrams of multi cylinder engine
WEEK 2

Theme: Transmission

Topic: Main components of a transmission unit

Sub-Topic:
Content:
1. Construction and operation of single plate clutch
2. Identification of parts and characteristics of clutches.
3. Clutch engagement and disengagement E.g. Mechanical and hydraulic
WEEK 2

Theme: Fuel And Exhaust System

Topic: Fuel pump

Sub-Topic:
Content:
1. Functions of fuel pump
2. Advantages and disadvantages of mechanical and electrical fuel pump.
3. Fuel pump maintenance
4. 4 Function and types of mufflers.
WEEK 3

Theme: Engine

Topic: Types of Engine (Cont.)

Sub-Topic:
Content:
1. Identification of main components of an engine.
2. Line diagrams of multi cylinder engine
WEEK 3

Theme: Transmission

Topic: Main components of a transmission unit

Sub-Topic:
Content:
1. Clutch engagement and disengagement E.g. Mechanical and hydraulic
WEEK 3

Theme: Fuel And Exhaust System

Topic: Muffler design

Sub-Topic:
Content:
Muffler design
WEEK 4

Theme: Transmission

Topic: Layout of Transmission

Sub-Topic:
Content:
1. Transmission system layout.
2. Types of drives i. Front engine front wheel drive.
ii. Front engine rear wheel drive.
iii. Rear engine rear wheel drive.
WEEK 4

Theme: Transmission

Topic: Main components of a transmission unit

Sub-Topic:
Content:
1 Operation of a sliding mesh gearbox.
2. Operation of a sliding mesh gearbox.
WEEK 4

Theme: Braking System

Topic: Braking system faults tracing

Sub-Topic:
Content:
Types of brake faults
WEEK 5

Theme: Transmission

Topic: Layout of Transmission (Cont.)

Sub-Topic:
Content:
1. Transmission system layout.
2. Types of drives i. Front engine front wheel drive.
ii. Front engine rear wheel drive.
iii. Rear engine rear wheel drive.
WEEK 5

Theme: Suspension And Steering System

Topic: Types of suspension and steering systems and their operation

Sub-Topic:
Content:
1. Types of suspension systems, i.e.
i. leaf spring type
ii. Coil spring
2. Steering faults.
3. Steering gearboxes
WEEK 5

Theme: Braking System

Topic: Anti-lock braking system (ABS)

Sub-Topic:
Content:
1. Functions of anti-lock braking systems.
2. Advantages and disadvantages of anti-lock braking system.
WEEK 6

Theme: Suspension And Steering System

Topic: Principles of operation of suspension and steering system

Sub-Topic:
Content:
1. Suspension and steering system of a motor vehicle.
2. Types of suspension and steering system.
3. Layout of steering system.
WEEK 6

Theme: Suspension And Steering System

Topic: Types of suspension and steering systems and their operation (Cont.)

Sub-Topic:
Content:
1. Types of suspension systems, i.e.
i. leaf spring type
ii. Coil spring
2. Steering faults.
3. Steering gearboxes
WEEK 6

Theme: Wheel And Tyres

Topic: Wheels and types balancing

Sub-Topic:
Content:
i. Light alloy rims
ii. Pressed steel disc.
iii. Wire wheels Interchanging tyres Types of tyre balancing
WEEK 7

Theme: Suspension And Steering System

Topic: Principles of operation of suspension and steering system (Cont.)

Sub-Topic:
Content:
1. Suspension and steering system of a motor vehicle.
2. Types of suspension and steering system.
3. Layout of steering system.
WEEK 7

Theme: Engine Lubrication And Cooling System

Topic: Operations of engine lubrication and cooling system

Sub-Topic:
Content:
1. Viscosity
2. Viscosity index
WEEK 7

Theme: Entrepreneurship(Methods Of Management)

Topic: Management

Sub-Topic:
Content:
1. Definition of management
2. i. Planning
ii. Organizing
iii. Controlling
iv. Staffing
v. Directing/supervising
3. Managing of resources (Money, men, materials, and machines)
4. 4 Concept of authority and responsibility in an enterprise.
WEEK 8

Theme: Engine Lubrication And Cooling System

Topic: Engine Lubrication and cooling system

Sub-Topic:
Content:
1. Purpose of cooling and lubrication system.
2. Layout and functions of the main components of lubrication and cooling system. E.g. radiators, fans, hose, oil pump, filter, etc.
WEEK 8

Theme: Engine Lubrication And Cooling System

Topic: Operations of engine lubrication and cooling system (Cont.)

Sub-Topic:
Content:
1. Oil filters
2. Rubber hose
WEEK 8

Theme: Entrepreneurship(Methods Of Management)

Topic: Enterprise

Sub-Topic:
Content:
1. Types of enterprise
2. Advantages and disadvantages of different types of enterprises
WEEK 9

Theme: Engine Lubrication And Cooling System

Topic: Engine Lubrication and cooling system (Cont.)

Sub-Topic:
Content:
1. Purpose of cooling and lubrication system.
2. Layout and functions of the main components of lubrication and cooling system. E.g. radiators, fans, hose, oil pump, filter, etc.
WEEK 9

Theme: Engine Lubrication And Cooling System

Topic: Operations of engine lubrication and cooling system (Cont.)

Sub-Topic:
Content:
1. Radiator
2. Functions of main components (stated above).
WEEK 9

Theme: Entrepreneurship(Methods Of Management)

Topic: Enterprise (Cont.)

Sub-Topic:
Content:
1. Types of enterprise
2. Advantages and disadvantages of different types of enterprises

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners

THIRD TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Fuel System And Exhaust System

Topic: Operation of braking system

Sub-Topic:
Content:
1. Principle of braking system.
2. Basic concept of friction as applied to braking system.
3. Advantages and disadvantages of mechanical and hydraulic brakes.
WEEK 2

Theme: Fuel System And Exhaust System

Topic: Fuel properties, carburetors, air cleansers

Sub-Topic:
Content:
1. Fuels
2. Carburetors i.e. simple and multi-jet types of carburetors.
3. Air cleaners
WEEK 2

Theme:

Topic:

Sub-Topic:
Content:
WEEK 3

Theme: Fuel System And Exhaust System

Topic: Operation of braking system (Cont.)

Sub-Topic:
Content:
1. Principle of braking system.
2. Basic concept of friction as applied to braking system.
3. Advantages and disadvantages of mechanical and hydraulic brakes.
WEEK 3

Theme: Fuel System And Exhaust System

Topic: Fuel properties, carburetors, air cleansers (Cont.)

Sub-Topic:
Content:
1. Fuels
2. Carburetors i.e. simple and multi-jet types of carburetors.
3. Air cleaners
WEEK 3

Theme:

Topic:

Sub-Topic:
Content:
WEEK 4

Theme: Braking System

Topic: Fuels and combustion

Sub-Topic:
Content:
1. General layout and working principles of the fuel system.
2. Illustrates the components parts of the fuel system.
WEEK 4

Theme: Fuel System And Exhaust System

Topic: Fuel properties, carburetors, air cleansers (Cont.)

Sub-Topic:
Content:
1. Fuels
2. Carburetors i.e. simple and multi-jet types of carburetors.
3. Air cleaners
WEEK 4

Theme:

Topic:

Sub-Topic:
Content:
WEEK 5

Theme: Braking System

Topic: Fuels and combustion (Cont.)

Sub-Topic:
Content:
1. General layout and working principles of the fuel system.
2. Illustrates the components parts of the fuel system.
WEEK 5

Theme: Braking System

Topic: Operation of mechanically operated braking system

Sub-Topic:
Content:
1. Mechanical and hydraulic operation of disc and drum brakes.
2. Master cylinder.
WEEK 5

Theme:

Topic:

Sub-Topic:
Content:
WEEK 6

Theme: Braking System

Topic: Types of manifold

Sub-Topic:
Content:
List types of manifold
WEEK 6

Theme: Braking System

Topic: Operation of mechanically operated braking system

Sub-Topic:
Content:
1. Wheel cylinder
2. Adjustments of brakes to achieve maximum efficiency.
3. Faults in braking system.
WEEK 6

Theme:

Topic:

Sub-Topic:
Content:
WEEK 7

Theme: Wheel And Tyres

Topic: Wheel: Characteristic Features of a good motor vehicle wheels

Sub-Topic:
Content:
1. Road wheels.
2. Tubeless and special tyres.
3. Over-inflation and under inflation.
4. Features of a tyres.
5. Advantages and disadvantages of:
Aluminum rims
Steel rims
WEEK 7

Theme: Braking System

Topic: Operation of hydraulic operated braking system

Sub-Topic:
Content:
1. Wheel cylinder
2. Adjustments of brakes to achieve maximum efficiency.
3. Faults in braking system.
WEEK 7

Theme:

Topic:

Sub-Topic:
Content:
WEEK 8

Theme: Wheel And Tyres

Topic: Wheel: Characteristic Features of a good motor vehicle wheels (Cont.)

Sub-Topic:
Content:
1. Road wheels.
2. Tubeless and special tyres.
3. Over-inflation and under inflation.
4. Features of a tyres.
5. Advantages and disadvantages of:
Aluminum rims
Steel rims
WEEK 8

Theme: Braking System

Topic: Operation of hydraulic operated braking system (Cont.)

Content:
1. Wheel cylinder
2. Adjustments of brakes to achieve maximum efficiency.
3. Faults in braking system.
WEEK 8

Theme:

Topic:

Sub-Topic:
Content:
WEEK 9

Theme: Wheel And Tyres

Topic: Types of Rims

Sub-Topic:
Content:
Advantages and disadvantages of:
- Aluminum rims
- Steel rims
WEEK 9

Theme: Braking System

Topic: Operation of hydraulic operated braking system (Cont.)

Content:
1. Wheel cylinder
2. Adjustments of brakes to achieve maximum efficiency.
3. Faults in braking system.
WEEK 9

Theme:

Topic:

Sub-Topic:
Content:

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners


Free Will Donation

We know times are tough right now, but if you could donate and support us, be rest assured that your great contributions are immensely appreciated and will be for the progress of our work to help us pay for the server cost, domain renewal, and other maintenance costs of the site. Nothing is too small; nothing is too little.

Account Details

BANK: UNITED BANK FOR AFRICA PLC

ACCOUNT NAME: OFAGBE GODSPOWER GEORGE

ACCOUNT NUMBER: 2250582550

SWIFT CODE: UNAFNGLA

ACCOUNT TYPE: SAVINGS

CURRENCY: DOLLAR (USD) ACCOUNT

ADDRESS: 1. M. Aruna Close, Ughelli, Delta State, Nigeria

PHONE: +234805 5084784, +234803 5586470



BANK: UNITED BANK FOR AFRICA Plc (UBA)

ACCOUNT NAME: OFAGBE GODSPOWER GEORGE

ACCOUNT NUMBER: 2042116266

SORT CODE: 033243371

ACCOUNT TYPE: SAVINGS

CURRENCY: NAIRA ACCOUNT

ADDRESS: 1. M. Aruna Close, Ughelli, Delta State, Nigeria

PHONE: +234805 5084784, +234803 5586470



Your active support gives strength to our Team and inspires to work. Each donated dollar is not only money for us, but it is also the confidence that you really need our project!
AseiClass is a non-profit project that exists at its founders' expense, it will be difficult to achieve our goals without your help.
Please consider making a donation.
Thank you.


AseiClass Team

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners

Facts about Teachers

● ● ● Teachers Are Great No Controversy.

● ● ● Teachers are like candles, they burn themselves to light others.

● ● ● Teachers don't teach for the money.

● ● ● Every great mind was once taught by some brilliant teachers.

● ● ● Teachers are the second parents we have.

● ● ● If you can write your name, thank your teacher.

Teaching slogans

● ● ● Until the learner learns the teacher has not taught.

● ● ● I hear and forget, I see and remember, I do and know.

● ● ● The good teacher explains. The superior teacher demonstrates. The great teacher inspires.

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners